lunedì 14 dicembre 2015

Update PLC 8 Web Relay with insert command direct of On and Off

Prepared new version of Plc 8 Web Relay with command direct of On and Off for la card KmTronic http://kmtronic.com/kmtronic-lan-ethernet-ip-8-channels-web-relay-board.html
Shopping in
http://sigma-shop.com/product/109/lan-ethernet-ip-8-channels-web-relay-board.html
The new interface is compatible with all card.
With this update can send command absolute of on or off.
The timer with this update ensures best execution for turning off the relay
Interface for each relay I entered the ON and OFF.

 
Insert command Auto-Connect with Local or DNS 

domenica 29 novembre 2015

Plc Temperature Monitor for Android Beta 3

The beta 3 of the program was completed.
In this version I have included the minimum and maximum limits for each temperature sensor in the settings.
If a value exceeds the limit, the display changes color, alerting the user.
I also added a warning via SMS, in this way, the program sends an SMS with the name of the sensor value across and the limit has been exceeded.

venerdì 27 novembre 2015

giovedì 19 novembre 2015

Thank you all for the support in the development of PLC applications for IOS

Create applications for IOS is not simple, the need for appropriate platform that supports "XCODE 7".  
XCode 7 while being free can only work with an Apple machine of the last generation, and have a high cost, this was the main problem for the continuous development and updating of PLC programs for IOS.For these reasons.
I thank all those who have been patient and supported the development of these applications with patience.With IOS 9 there was a slowdown in growth, I had to update all applications to make them compatible with the new system.In addition, approval of apple was longer than expected, and for those who had updated its operating system was a problem, but now, after two months all efforts were rewarded by your thanks, and I also want thank you all for the confidence and patience.

domenica 1 novembre 2015

PLC Relay 8 UDP (1.0.0) for IOS (iPhone iPad) IS ONLINE

"Plc 8 Relay On Off UDPVersion 1.0.0 is ready.
This pilot program the card Kmtronic (c) equipped with 8 relays.
This program allows you to send the signal "on" and "off" to the relay.
The UDP version has the commands "On" and "Off" unlike the version that has the TCP command sends impulse relay so the relay is actuated and the value is reversed.


Plc2RelayOnOff

Plc8RelayOnOff web Relay (2.8.1) for IOS (iPhone iPad) IS ONLINE

The wait was long, Is online PLC8RelayOnOff Web Relay,  version 2.8.1.
This new version improves handling of the relays, and receives the value of the relay after you send a command, in response to the action itself.
In this way, we know in real time whether the command has reached the destination without error.
Previously, after each command, we would read the status of the relay.
Thanks to the Log (debug) we can see in real time the actions you perform commands, and if we have activated the timer, at this exact moment, send the command and reports all of Log 



Plc2RelayOnOff
.

mercoledì 21 ottobre 2015

Plc2RelayOnOff (3.0.1) for IOS (iPhone iPad) IS ONLINE

Is online PLC2RelayOnOff Web Relay,  version 3.0.1.
This new version improves handling of the relays, and receives the value of the relay after you send a command, in response to the action itself.
In this way, we know in real time whether the command has reached the destination without error.
Previously, after each command, we would read the status of the relay.
Thanks to the Log (debug) we can see in real time the actions you perform commands, and if we have activated the timer, at this exact moment, send the command and reports all of Log 


Plc2RelayOnOff
.

lunedì 12 ottobre 2015

Plc2RelayOnOff (3.0.1) for IOS (iPhone iPad)

While waiting for Apple to approve the version 3.0.0 of PLC2RelayOnOff, I prepared a new version, 3.0.1.
This new version improves handling of the relays, and receives the value of the relay after you send a command, in response to the action itself.
In this way, we know in real time whether the command has reached the destination without error.
Previously, after each command, we would read the status of the relay.
Thanks to the Log (debug) we can see in real time the actions you perform commands, and if we have activated the timer, at this exact moment, send the command and reports all of Log.


In attesa che Apple approvi la versione 3.0.0 di PLC2RelayOnOff, ho pronta una nuova versione, la 3.0.1.
Questa nuov versione migliora la gestione dei relè, e riceve il valore del relè dopo che si è inviato il comando, in risposta all'azione stessa.
In questo modo, sappiamo in tempo reale se il comando ha raggiunto la destinazione senza errori.
In precedenza, dopo ogni comando, leggevamo lo stato dei relè. 
Grazie alla funzione Log (debug) possiamo vedere in tempo reale le azioni che compiono i comandi, e se abbiamo attivato il timer, questo al momento esatto, invia il comando e relaziona tutto su Log.
 

sabato 10 ottobre 2015

Plc 2 Relay On Off for iPhone and iPad Version (2.8.0) IS ON LINE

Apple approval  the version 2.8 of the program Plc2RelayOnOff
for card Kmtronic with two relay http://kmtronic.com/kmtronic-lan-ethernet-ip-2-channels-web-relay-board.html

This new version fixes some problems encountered by users, which is promptly communicated them.
Also corrects the problem starting in IOS 9.0.

Thanks to all users who have been able to wait patiently approval times by apple.



https://itunes.apple.com/us/app/plc2relayonoff/id857102914?mt=8



Apple ha approvato la  versione 2.8 del programma Plc2RelayOnOff per  la scheda Kmtronic con due relè http://kmtronic.com/kmtronic-lan-ethernet-ip-2-channels-web-relay-board.html

Questa nuova versione corregge alcuni problemi riscontrati dagli utenti, i quali prontamente c'è li hanno comunicati.
Inoltre corregge il problema di avvio in IOS 9.0.

Grazie a tutti gli utenti che con pazienza hanno saputo aspettare i tempi di approvazione da parte di apple.

https://itunes.apple.com/us/app/plc2relayonoff/id857102914?mt=8

mercoledì 7 ottobre 2015

Added the OFF timer in all relays PLC

All PLC applications for both Android (which most had) that iOS (iPhone and iPad) are going to be updated with the new switch-off time.
I have included two new features:
1) The function of debugging (which is activated by pressing the LOG key)
2) The function resets the database, hidden function (which will be announced only on richiesta)
I also optimized the error reports, in some cases, when the connection is not optimal was displayed an error message that deceived the operator.

Applications for Apple, as you know, have a long waiting period before being approved.
(It would be appropriate, that Apple for updates, reduced wait times for approval)

The Android apps are approved within hours.

lunedì 5 ottobre 2015

Plc 8 Relay on off UDP for Android and IOS (iPhone, iPad) with timer off

Plc 8 Relay on off UDP for Android and IOS (iPhone, iPad) with timer off has been completed and will soon be available in the stores of Apple and Google.
This new version is characterized by the presence of the OFF timer.
I entered the DEBUG function, which is activated by pressing the LOG button. to test the timers inserted.

giovedì 1 ottobre 2015

giovedì 24 settembre 2015

All relay applications have been updated and sent to Apple for approval.

I inform you that I have updated all the applications that are run relay Kmtronic and now support the new version of Apple's operating system iOS 9.0.

The applications are waiting to be approved by Apple after which will be made public in this way, users can update them without problems.

Ringranzio anyone quickly inforamto I have the problem of not avviao after installing IOS 9.

I lined the version to 2.7. 0
After this version, I have beta version 3.0




Vi comunico che ho aggiornate tutte le applicazioni che gestiscono i relè della Kmtronic e adesso supportano la nuova versione del sistema operativo di Apple IOS 9.0.

Le applicazioni sono in attesa di essere approvate dalla Apple dopo di chè saranno rese pubbliche in questo modo gli utenti potranno aggiornarle senza problemi.

Ringranzio tutti coloro che celermente mi hanno inforamto del problema del non avviao dopo aver installato IOS 9.

Ho allineato le versione alla 2.7. 0
Dopo questa versione, ho in fase beta la versione 3.0  


mercoledì 23 settembre 2015

Work in progress for starting applications with IOS 9 of Apple

I give you good news, in short all the applications will be updated and will support the new version of IOS 9  of Apple

Vi do una buona notizia, a breve le applicazioni verranno tutte aggiornate e supporteranno la nuova versione di IOS 9 di Apple.

domenica 20 settembre 2015

My applications do not start with IOS 9

Dear User, Apple updated its Operating System Version 9,
After this update, for reasons not dependent on my will, not applications are launched.
For those who want to use my applications, I do not recommend for the time to update the system to prioprio IOS9.


I suspended the application from Apple AppStore can not prevent you from installing the devices that have IOS9.


For those who had done it, and want to go back I found this guide on how to return IOS8
ENG http://www.pcadvisor.co.uk/how-to/mobile-phone/how-downgrade-from-ios-9-ios-8-reinstall-ios-8-uninstall-3618122/
ENG http://osxdaily.com/2015/09/16/downgrade-ios-9-back-to-ios-8-4-1/
ITA http://www.macitynet.it/downgrade-da-ios-9-a-ios-8-4-1/

The problem that the program did not start due a the change of API of IOS9.
Ascertained this, I disabled the applications on the AppStore, waiting to update all applications with the new API.
All users who have the software PLC Relay for now advise you not to upgrade to IOS9, if they do, the program will no longer work.



Gentili utenti, Apple ha aggiornato il proprio Sistema Operativo alla versione 9,
dopo questo aggiornamento, per cause non dipendenti dalla mia volonta, le applicazioni non vengono avviate
.
Per chi desidera utilizzare le mie applicazioni, sconsiglio per il momento di aggiornare il prioprio sistema a IOS9.

Ho sospeso le applicazioni dal AppStore di Apple non potendo impedire l'installazione ai device che hanno IOS9. 



Per chi l'avesse fatto, e vuole tornare indietro ho trovato questa guida che spiega come ritornare a IOS8

ENG http://www.pcadvisor.co.uk/how-to/mobile-phone/how-downgrade-from-ios-9-ios-8-reinstall-ios-8-uninstall-3618122/
ENG http://osxdaily.com/2015/09/16/downgrade-ios-9-back-to-ios-8-4-1/
ITA http://www.macitynet.it/downgrade-da-ios-9-a-ios-8-4-1/


Il problema che il programma  non avvia non è imputabile alla applicazione, ma alla variazione delle API di IOS9.
Accertato questo, ho disabilitato le applicazioni sull'AppStore, in attesa di aggiornare tutte le applicazioni con le nuove API.
A tutti gli utenti che hanno i programmi PLC Relay per il momento consiglio di non passare alla versione IOS9, nel caso in cui lo fanno, i programmi non funzioneranno più.


venerdì 18 settembre 2015

PLC Relay 8 UDP control Pro for Android

"Plc 8 Relay On Off UDPVersion 1.0.0 is ready.
This pilot program the card Kmtronic (c) equipped with 8 relays.
This program allows you to send the signal "on" and "off" to the relay.
The UDP version has the commands "On" and "Off" unlike the version that has the TCP command sends impulse relay so the relay is actuated and the value is reversed.


This version for Android published on Google Play Store.
https://play.google.com/store/apps/details?id=com.embarcadero.Plc8RelayOnOffUdp&hl=it



 




"Plc 8 Relay On Off UDP" versione 1.0 è stata rilasciata.
Questo programma pilota la scheda della Kmtronic (c) equipaggiata con otto relè.
Questo programma permette di inviare il segnale di "on" e di "off" al relè.
La versione UDP ha i comandi "On" ed "Off" a differenza della versione TCP che ha il comando invia impulso a relè per cui il relè viene azionato e il valore viene invertito. 


 



Versione per Android pubblicata su Google Play Store. 



https://play.google.com/store/apps/details?id=com.embarcadero.Plc8RelayOnOffUdp&hl=it


martedì 21 luglio 2015

Plc 2 Relay On Off UDP for Android Vers. 2.0.0

"Plc 2 Relay On Off UDPVersion 2.0.0 is ready.
This pilot program the card Kmtronic (c) equipped with two relays.
This program allows you to send the signal "on" and "off" to the relay.
The UDP version has the commands "On" and "Off" unlike the version that has the TCP command sends impulse relay so the relay is actuated and the value is reversed.


The version for iPhone and iPad is ready show on App Store

This version for Android published on Google Play Store.



"Plc 2 Relay On Off UDP" versionè 2.0.0 è stata rilasciata.
Questo programma pilota la scheda della Kmtronic (c) equipaggiata con due relè.
Questo programma permette di inviare il segnale di "on" e di "off" al relè.
La versione UDP ha i comandi "On" ed "Off" a differenza della versione TCP che ha il comando invia impulso a relè per cui il relè viene azionato e il valore viene invertito. 


La versione per iPhone e iPad è pronta ed è stata approvata da Apple 
 

Versione per Android pubblicata su Google Play Store. 

https://play.google.com/store/apps/details?id=com.zenoapp.plc2relayonoffUDP&hl=it

lunedì 15 giugno 2015

Plc 8x4 Relay On Off for iPhone

Apple approved this application 


This new program allows you to manage 4 cards that are equipped with 8 relays with web server, product by  KMTronic
Link App  Store
Link IP Card with 8 Relay  KMTronic
 KMTronic LAN Ethernet IP 8 channels WEB Relay board


The program allows you to manage the parameters for every single card, by the IP / DNS and  door.

I added the parameter Label for each relay.

The connection test is done after you click on the connect button.

Sampler setting router:
europe54.dyndns.org:8091 (192.168.1.191 port in/out 8091 tcp)
italy30.dyndns.org:8092 (10.130.1.192 port in/out 8092 tcp)
usa55.dyndns.org:8093 (192.168.10.193 port in/out 8093 tcp)
home.dyndns.org:8094 (15.0.0.194 port in/out 8094 tcp)
home2.dyndns.org:8095 (192.168.1.195 port in/out 8095 tcp)



lunedì 9 febbraio 2015

Plc 8x4 Relay On Off Pro for android


This new program allows you to manage 4 cards that are equipped with 8 relays with web server, product by  KMTronic
Link App Play Store
Link IP Card with 8 Relay  KMTronic
 KMTronic LAN Ethernet IP 8 channels WEB Relay board

The program allows you to manage the parameters for every single card, by the IP / DNS and  door.

I added the parameter Label for each relay.

The connection test is done after you click on the connect button.

Sampler setting router:
europe54.dyndns.org:8091 (192.168.1.191 port in/out 8091 tcp)
italy30.dyndns.org:8092 (10.130.1.192 port in/out 8092 tcp)
usa55.dyndns.org:8093 (192.168.10.193 port in/out 8093 tcp)
home.dyndns.org:8094 (15.0.0.194 port in/out 8094 tcp)
home2.dyndns.org:8095 (192.168.1.195 port in/out 8095 tcp)



Italiano 
https://play.google.com/store/apps/details?id=com.zeno.plc8x4relayonoffproQuesto nuovo programma consente di gestire 4 schede che sono dotati di 8 relè con server web, prodotta KMTronic


Link App Play Store
Link Scheda IP con 8 Relè della KMTronic
Il programma permette di gestire i parametri per ogni singola scheda, dal IP / DNS e la porta.

Ho aggiunto il parametro Label per ogni relè.

Il test di connessione viene effettuata dopo aver fatto clic sul pulsante di connessione.

Sampler router impostazione:
europe54.dyndns.org:8091 (192.168.1.191 porta in / out 8091 tcp)
italy30.dyndns.org:8092 (10.130.1.192 porta in / out 8092 tcp)
usa55.dyndns.org:8093 (192.168.10.193 porta in / out 8093 tcp)
home.dyndns.org:8094 (15.0.0.194 porta in / out 8094 tcp)
home2.dyndns.org:8095 (192.168.1.195 porta in / out 8095 tcp)













lunedì 26 gennaio 2015

Arduino - Accendiamo un LED tramite una fotoresistenza e visualizziamo il tutto su uno schermo LCD

Questo piccolo progetto, fa accendere un LED Rosso.
1)  quando la luce della fotoresistenza scende sotto il valore 300;
2)  ho inserito un pulsante che se premuto accende sempre lo stesso LED al rilascio il LED si spegne;

Inoltre ho inserito un potenziometro da 10K per regolare la retro illuminazione del dispaly.

 
Sotto ho inserito le foto con maggiori dettagli e il codice sorgente