giovedì 24 settembre 2015

All relay applications have been updated and sent to Apple for approval.

I inform you that I have updated all the applications that are run relay Kmtronic and now support the new version of Apple's operating system iOS 9.0.

The applications are waiting to be approved by Apple after which will be made public in this way, users can update them without problems.

Ringranzio anyone quickly inforamto I have the problem of not avviao after installing IOS 9.

I lined the version to 2.7. 0
After this version, I have beta version 3.0




Vi comunico che ho aggiornate tutte le applicazioni che gestiscono i relè della Kmtronic e adesso supportano la nuova versione del sistema operativo di Apple IOS 9.0.

Le applicazioni sono in attesa di essere approvate dalla Apple dopo di chè saranno rese pubbliche in questo modo gli utenti potranno aggiornarle senza problemi.

Ringranzio tutti coloro che celermente mi hanno inforamto del problema del non avviao dopo aver installato IOS 9.

Ho allineato le versione alla 2.7. 0
Dopo questa versione, ho in fase beta la versione 3.0  


mercoledì 23 settembre 2015

Work in progress for starting applications with IOS 9 of Apple

I give you good news, in short all the applications will be updated and will support the new version of IOS 9  of Apple

Vi do una buona notizia, a breve le applicazioni verranno tutte aggiornate e supporteranno la nuova versione di IOS 9 di Apple.

domenica 20 settembre 2015

My applications do not start with IOS 9

Dear User, Apple updated its Operating System Version 9,
After this update, for reasons not dependent on my will, not applications are launched.
For those who want to use my applications, I do not recommend for the time to update the system to prioprio IOS9.


I suspended the application from Apple AppStore can not prevent you from installing the devices that have IOS9.


For those who had done it, and want to go back I found this guide on how to return IOS8
ENG http://www.pcadvisor.co.uk/how-to/mobile-phone/how-downgrade-from-ios-9-ios-8-reinstall-ios-8-uninstall-3618122/
ENG http://osxdaily.com/2015/09/16/downgrade-ios-9-back-to-ios-8-4-1/
ITA http://www.macitynet.it/downgrade-da-ios-9-a-ios-8-4-1/

The problem that the program did not start due a the change of API of IOS9.
Ascertained this, I disabled the applications on the AppStore, waiting to update all applications with the new API.
All users who have the software PLC Relay for now advise you not to upgrade to IOS9, if they do, the program will no longer work.



Gentili utenti, Apple ha aggiornato il proprio Sistema Operativo alla versione 9,
dopo questo aggiornamento, per cause non dipendenti dalla mia volonta, le applicazioni non vengono avviate
.
Per chi desidera utilizzare le mie applicazioni, sconsiglio per il momento di aggiornare il prioprio sistema a IOS9.

Ho sospeso le applicazioni dal AppStore di Apple non potendo impedire l'installazione ai device che hanno IOS9. 



Per chi l'avesse fatto, e vuole tornare indietro ho trovato questa guida che spiega come ritornare a IOS8

ENG http://www.pcadvisor.co.uk/how-to/mobile-phone/how-downgrade-from-ios-9-ios-8-reinstall-ios-8-uninstall-3618122/
ENG http://osxdaily.com/2015/09/16/downgrade-ios-9-back-to-ios-8-4-1/
ITA http://www.macitynet.it/downgrade-da-ios-9-a-ios-8-4-1/


Il problema che il programma  non avvia non è imputabile alla applicazione, ma alla variazione delle API di IOS9.
Accertato questo, ho disabilitato le applicazioni sull'AppStore, in attesa di aggiornare tutte le applicazioni con le nuove API.
A tutti gli utenti che hanno i programmi PLC Relay per il momento consiglio di non passare alla versione IOS9, nel caso in cui lo fanno, i programmi non funzioneranno più.


venerdì 18 settembre 2015

PLC Relay 8 UDP control Pro for Android

"Plc 8 Relay On Off UDPVersion 1.0.0 is ready.
This pilot program the card Kmtronic (c) equipped with 8 relays.
This program allows you to send the signal "on" and "off" to the relay.
The UDP version has the commands "On" and "Off" unlike the version that has the TCP command sends impulse relay so the relay is actuated and the value is reversed.


This version for Android published on Google Play Store.
https://play.google.com/store/apps/details?id=com.embarcadero.Plc8RelayOnOffUdp&hl=it



 




"Plc 8 Relay On Off UDP" versione 1.0 è stata rilasciata.
Questo programma pilota la scheda della Kmtronic (c) equipaggiata con otto relè.
Questo programma permette di inviare il segnale di "on" e di "off" al relè.
La versione UDP ha i comandi "On" ed "Off" a differenza della versione TCP che ha il comando invia impulso a relè per cui il relè viene azionato e il valore viene invertito. 


 



Versione per Android pubblicata su Google Play Store. 



https://play.google.com/store/apps/details?id=com.embarcadero.Plc8RelayOnOffUdp&hl=it