domenica 5 marzo 2017

New version (4.1.3) of PLC 2 Web Relay

 This program allows you to control the relay of the card KMTronic (C), hardware that can turn on and off 2 relays connected to a LAN network . 

The configuration is very simple, after installing the program, go to Setting with menu, and insert value url, users, password.

There is also a virtual timer, it is recommended that if you use the timer setting, add a hardware timer to the card.  In the case of signal interruption toward the Kmtromic board, you can not turn off the relay and the command will not arrive at your destination, so you might burn the connected equipment, it is recommended when using the timer fiction, a hardware timer.
Here's how is operation:
1) Send the command; Set the button's value-neutral (gray)
2) Awaits the outcome of the command and re-reads the status of the button;
3) Show the status of the button;

Nessun commento:

Posta un commento