Plc Temp Monitor version 2.0.7 is released!

 Con questo nuovo aggiornamento viene visualizzato il grafico per ogni sensore di temperatura, la visualizzazione del grafico è personalizzabile dal pannello impostazioni.

With this new update the graph is displayed for each temperature sensor, the graph display can be customized from the settings panel..

• 
  
• 
  
• 
  

Plc Temp Monitor version 2.0.3 is released!

Questo nuovo aggiornamento, come anticipato tempo fa, è stato riscritto da zero, allo scopo di poter  gestire le nuove versioni di android ed essere ottimizzato per il futuro, rispettando le nuove specifiche di google.

Questa nuova versione, non può importare i parametri precedenti, si prega di reimpostare i parametri dopo l'aggiornamento, vi appare la scritta "url demo" 

Questa versione a differenza della precedente può gestire fino a 6 sensori.


This new update, as anticipated some time ago, has been rewritten from scratch, in order to be able to manage new versions of android and be optimized for the future, respecting the new specifications of google.


This new version, can not import the previous parameters, please reset the parameters after the update, there appears the writing "url demo"


This version unlike the previous one can manage up to 6 sensors.

Plc 8 Web Relay Pro version 3.1.1 is released!

Questo nuovo aggiornamento, come anticipato tempo fa, è stato riscritto da zero, allo scopo di poter  gestire le nuove versioni di android ed essere ottimizzato per il futuro.

Questa nuova versione, non può importare i parametri precedenti, si prega di reimpostare i parametri dopo l'aggiornamento


Si raccomanda di utilizzare la modalità <<Direct Mode>> se il vostro dispositivo hardware lo sopporta. In questo modo, i comandi verranno inviati in modo assoluto, e la ripetuta pressione di un pulsante non invertirà il relè, nella modalità classic, ogni volta che si preme il pulsante, si inverte il relè da (on ad off e da off ad on)

- Personalizza icone pulsanti, file explorer per assegnare il file immagine; (Memoria interna, crea cartella /DCIM/Plc8IconTCP)

- Aggiornamento automatico Icona Animazione

This new update, as anticipated some time ago, has been rewritten from scratch, in order to be able to manage the new android versions and be optimized for the future.


This new version, can not import the previous parameters, please reset the parameters after the upgrade


We recommend using the << Direct Mode >> mode if your hardware device supports it. In this way, the commands will be sent in an absolute way, and the repeated pressure of a button will not invert the relay, in the classic mode, each time the button is pressed, the relay is inverted from (on to off and from off to on) )


- Customize button icons, file explorer to assign the image file; (Internal memory, create folder / DCIM / Plc8IconTCP)

- Automatic update Animation icon

Plc 8x4 Relay On Off for IOS - New Version is ONLINE

Ho provveduto a rilasciare una nuova versione di Plc 8x4 Relay per IOS, anche questa riscritta da Zero. Questa nuova versione ottimizzata per le nuove versioni di  IOS è più efficente e risponde meglio nella comunicazione con le schede relay.

Plc 8 Relay On Off for iPhone and iPad Version (3.4) is Approved

 Dopo un periodo di stasi, ho riscritto da Zero, il programma per la gestione della scheda Relè della Kmtroic per IOS 10.

Questa nuova versione è stata riscritta da Zero al fine di essere compatibile anche le versioni future di IOS.

In precedenza, dopo il rilascio di una nuova versione di IOS si  presentavano dei piccoli inconvenienti o problemi.


Nella riscrittura ho ottimizzato alcuni processi, sia per quanto riguarda la comunicazione con la scheda e sia per la gestione dei timer.
Le prestazioni di questa nuova versione sono superiori alla vecchia e non dovrebbe, uso il condizionale, mostrare anomalie.

Plc 8 Web Relay version 5.0.1 is released!

The test phase has been completed, it available via the portal "Play Store" the new version 5.0.1 of the application Plc8WebRelay.
 
Thanks to everyone who helped test this new application.

The version 5.0.1 as anticipated, contains the following new features:
 
- Customize icons, file explorer to assign the image file; (Internal memory, create folder /DCIM/Plc2Icon)
- Icon Animation automatic update, according to the time specified in the settings.

Plc8WebRelay version 5 is coming out!

In this new version I have implemented the motifiche tested Plc2WebRelay, timer management, timed start and customizing icons.

Plc 2 Web Relay version 5.0.0 is released!

The test phase has been completed, it will soon be available via the portal "Play Store" the new version 5.0.0 of the application Plc2WebRelay.
Thanks to everyone who helped test this new application.
The version 5.0.0 as anticipated, contains the following new features:
- Customize icons, file explorer to assign the image file; (Internal memory)
- Icon Animation automatic update, according to the time specified in the settings.

Published beta 4.9.1 (5.0) of Plc2WebRelay

This link publish Plc2WebRelay https://play.google.com/apps/testing/com.zeno.plc2relayonoff   click for install beta
This new update:
- Customize image button relay;
- Animation  icon refresh automatic;

Custom button in the new version 5.0 Plc2WebRelay

Here's a preview of what evolves the settings screen, allowing you to choose the imagines in the various buttons.

New version (4.3.7) of PLC 2 Web Relay

With this latest update, the application also runs the old cards of Kmtronic. The old cards do not accept direct commands, but only receive pulse commands. Also older cards were not providing the relay label, in some sections.
In order to make it easier to manage, I added the ability to choose which type of card you're using.
Also, I have added the ability to choose, for the new cards, labels programmed directly the card, or the labels in the program settings.
Finally, I completed the timers, placing the clocks, for 2 relays; imporant to remember that you can not simultaneously use both timer that clocks for each relay;
Remember that timers / clocks are virtual, the loss of connection, may result in equipment damage, it is appropriate to combine hardware timer.

Con quest'ultimo aggiornamento, l'applicazione gestisce anche le vecchie schede della Kmtronic. Le vecchie schede non accettano comandi diretti, ma ricevono solo comandi ad impulso. Inoltre le vecchie schede non fornivano l'etichetta del relè, in alcune sezioni.
Al fine di rendere più facile la gestione, ho inserito la possibilità di scegliere quale tipo di scheda si sta utilizzando.
Inoltre, ho inserito la possibilità di scegliere, per le nuove schede, le etichette programmate direttamente nella scheda, oppure le etichette presenti nelle impostazioni del programma.
Infine, ho completato i timer, inserendo gli orologi, per i 2 relè; importante ricordare che non si possono utilizzare contemporaneamente sia i timer che gli orologi per singolo relè;

Ricordate che i timer/orologi sono virtuali, la perdita di connessione, può causare danni alle apparecchiature, è opportuno abbinare timer hardware.

New version (4.1.3) of PLC 2 Web Relay

 This program allows you to control the relay of the card KMTronic (C), hardware that can turn on and off 2 relays connected to a LAN network . 

The configuration is very simple, after installing the program, go to Setting with menu, and insert value url, users, password.

There is also a virtual timer, it is recommended that if you use the timer setting, add a hardware timer to the card.  In the case of signal interruption toward the Kmtromic board, you can not turn off the relay and the command will not arrive at your destination, so you might burn the connected equipment, it is recommended when using the timer fiction, a hardware timer.
Here's how is operation:
1) Send the command; Set the button's value-neutral (gray)
2) Awaits the outcome of the command and re-reads the status of the button;
3) Show the status of the button;

New version Zeno CF version 6.0

New version beta of Zeno CF  (RC3 version 6.0).

IPSensor Pro 5 for iphone and ipad, monitor and control 5 devices: IPSW2210 and IPS2222

IPSensor Pro 5 for iPhone and iPad, monitor and control 5 devices: IPSW2210 and IPS2222

IPSensor Pro 5, monitor and control 5 devices: IPSW2210 and IPS2222

No need for a central server or dedicated setup.
The Application allows to enter IP address, port and authentication of your installed device.
IPSensor application is collecting all data like sensor values, sensor names, device name, location, IP address, HTTP port and allows direct control of relays.
To ensure proper operation, please make sure that your IPS controller is updated with the latest firmware.

Features:
- display temperature and humidity sensor values
- display analog and dry contact inputs
- control relay outputs

Typical applications:
- Home automation
- Server rooms
- IT
- Building management
- Control of heating/cooling systems

Supported devices:
- IPSW2210 (Firmware version 2.07 or higher)
- IPS2222 (Firmware version 1.3.6 or higher)

More info at www.ip-sens.com

Plc Temp Monitor Vers. 1.5

Ho rilasciato una nuova versione del programma Plc Temp Monitor che gestisce le schede della Kmtronc per la lettura delle temperature attraverso alcune sonde.
Questa nuova versione archivia tutti i dati letti dai sensori e permette di esportarli in formati CSV per una futura gestione, inoltre visualizza un grafico, sia in tempo reale, oppure sulla scorta dei dati già archiviati.

https://play.google.com/store/apps/details?id=com.zenoapp.PlcTempMonitor

 

IPSensor Pro 5 (Beta) for Android - Monitor and Control Card IPSW2210 and IPS2222

IPSensor Pro 5 (Beta), monitor and control 5 devices: IPSW2210 and IPS2222

IPSensor Pro 5, monitor and control 5 devices: IPSW2210 and IPS2222

No need for a central server or dedicated setup.
The Application allows to enter IP address, port and authentication of your installed device.
IPSensor application is collecting all data like sensor values, sensor names, device name, location, IP address, HTTP port and allows direct control of relays.
To ensure proper operation, please make sure that your IPS controller is updated with the latest firmware.

Features:
- display temperature and humidity sensor values
- display analog and dry contact inputs
- control relay outputs

Typical applications:
- Home automation
- Server rooms
- IT
- Building management
- Control of heating/cooling systems

Supported devices:
- IPSW2210 (Firmware version 2.07 or higher)
- IPS2222 (Firmware version 1.3.6 or higher)

More info at www.ip-sens.com

IPSensor 1.0 for Android - Monitor and Control Card IPSW2210 and IPS2222

I present another application for android,  IPSensor application monitor and control IPSW2210 and IPS2222 Ethernet controllers.

IPSensor application monitor and control IPSW2210 and IPS2222 Ethernet controllers.
No need for a central server or dedicated setup.
The Application allows to enter IP address, port and authentication of your installed device.
IPSensor application is collecting all data like sensor values, sensor names, device name, location, IP address, HTTP port and allows direct control of relays.
To ensure proper operation, please make sure that your IPS controller is updated with the latest firmware.

Features:
- display temperature and humidity sensor values
- display analog and dry contact inputs
- control relay outputs

Typical applications:
- Home automation
- Server rooms
- IT
- Building management
- Control of heating/cooling systems

Supported devices:
- IPSW2210 (Firmware version 2.07 or higher)
- IPS2222 (Firmware version 1.3.6 or higher)

More info at www.ip-sens.com

https://play.google.com/store/apps/details?id=com.zenoapp.IPSensor